api technologies ? 8061 avonia rd. ? fairview, pa 16415 ? ph: 814-474-1571 ? fax: 814-474-3110 ? eis.apitech.com api technologies spectrum control gmbh ? hansastrasse 6 ? 91126 schwabach, germany ? phone: (49)-9122-795-0 ? fax: (49)-9122-795-58 high current filters are ideal for use in high current 5 volt logic buss, but also can be used for 48 vdc telephone rack buss, high current switch mode power supplies and dc charging systems. high voltage filters find use in high voltage power supplies and applications requiring u.l. hi-pot. features current ratings up to 100 amps continuous voltage ratings up to 1250 vdc/240 vac (400hz) u.l. 1459 recognized and csa c22.2 approved versions available rugged bolt-in style for easy installation
typ. . .815 ( hex. .563 ( .060 max., typ. 1-1/2 imperfect thds. .250 (6.35) min. .250 (6.35) .250 (6.35) .250 (6.35) min. .500 (12.7) hex. ?.062 .005 (1.58 .13) typ. 5/16C4 unf?C thd. .250 (6.35) figure 3 dimensions in inches (mm) high current/high voltage resin sealed filters lp24 installation notes for figure 1 & 2 see below (figure 3 see page cf6) 1. mounting installation torque method a: mounting in full threaded through-hole maximum torque: 96 in-lbs method b: mounting w/hardware maximum torque: 84 in-lbs 2. terminal installation torque maximum torque: 20 in-lbs note: use two-wrench method to install terminal hardware
api technologies ? 8061 avonia rd. ? fairview, pa 16415 ? ph: 814-474-1571 ? fax: 814-474-3110 ? eis.apitech.com api technologies spectrum control gmbh ? hansastrasse 6 ? 91126 schwabach, germany ? phone: (49)-9122-795-0 ? fax: (49)-9122-795-58 high current/high voltage resin sealed filters .375 (9.53) 1.250 .031 (31.8 .79) .312 (7.93) 1.000 .031 (25.4 .79) .250 flats .578 max. (14.68 max.) .327 max. (8.30 max.) mounting surface ?.051 .005 (?1.30 .13) 5/16C4 unf?C figure 4 .500 (12.7) .937 .031 (23.8 79) .325 (8.26) .075 (1.91) .689 .031 (17.5 .79) ?.057 .005 (?1.45 .13) mounting surface 3/8C32unefC2a thd. figure 5 .990 .031 (25.15 .79) .020 (.51) .375 (9.53) .125 (3.18) .740 .031 (18.61 .79) 3/8C2 unef?C thd. .500 (12.70) figure 6 30 30 30 30 7 40 40 40 40 12 20 10 6 5 50 50 50 50 20 25 10 22 20 15 50 50 50 50 30 35 20 32 30 50 50 50 50 50 33 40 28 35 35 50 minimum insertion loss (db) 60 60 200 200 600 600 750 750 1250 2500 rated voltage 125c i amp min cap 10 mhz part number also available through apis authorized distributors. also available through apis authorized european distributors/agents. * denotes parts that are ul recognized to ul 60950 and certified to csa c22.2 ** denotes parts that meet 1500 vac dielectric withstanding voltage per ul 1283 and csa c22.2 *** ac voltage to be 400hz 54-848-005* 54-853-001* 54-853-004 54-848-008 54-844-001** 54-844-002** 54-763-008 54-763-009 54-789-003 1280-060 figure dc 30 mhz 100 mhz 300 mhz 1 ghz 10 ghz 3 mhz 1 2 2 1 3 3 4 4 5 6 50 50 100 100 25 25 25 25 25 25 0.22 f 0.22 f 0.22 f 0.22 f 4700 pf 20% 0.01 f 20% 1000 pf 4000 pf 4000 pf 1500 pf 50 50 50 50 50 57 28 35 35 50 50 50 50 50 50 57 28 40 35 50 140 140 240 240 ac*** 20 20 20 20 3 1 mhz ckt c c c c c c c c c pi high current high voltage feed-through dimensions in inches (mm) lp25
|
